Clean and replace the air filter of the concrete laser screed machine
It is strictly forbiden clean or replace the air filter when the engine is running.
If you use compressed air to clean the air filtration chip, the flying dust is possible fly into the eyes,so you must wear safety glass.
Caution !
1> If oil,grease or carbon black is stuck on the air filtration chip, you should clean it with a special filter cleaner.Below is the instruction of air filter.
2> If you use the machine in the harsh environment or conditions, please clean and replace the air filtration chip more frequently.
Cleaning
1> Take off the air filtration chip, use dry compressed air with pressure 0.68Mpa (7kg/cm) blow from the inner side of the air filtration chip along circumference.
Inspection
1> Visual inspection air filtration chip should be no damage.
Replace the air filtration chip.
1> Remove the air filtration chip
2> Pack the air connection with a clean cloth or tape.