concrete laser screed machine driving and construction
Machine moving: Start the engine, push forward or backward the right handle shifting fork, the machine will moves forward or backward. Shifting fork angle increases faster moving speed.
Machine turning: Push forward or backward the left handle shifting fork, will realize the machine to the left or right turn. Shifting fork angle increases faster moving speed.
Note: always keep the handle clean and repair if damaged.
- Construction operation
After the commissioning of the laser system and the whole machine, enter the concrete construction site .
Arrived at the construction site, press the rocker switch of leveling cylinder makes the work head downward movement to the concrete surface, then loosen the switch and press the rocker switch of auger motor, vibration motor. Switch the manual/auto mode; turn on the automatic mode under the laser system control (at present, the left and right regulating cylinder control valve, tilt cylinder control valve are controlled by the laser system). At the same time, push the shifting fork to drives machine to move at a constant speed.