- Check before starting of the concrete laser screed manchine
To develop the habit of inspection before starting, must not be hasty, careless to engage in, which is conducive to human and machine safety.
1.1 Check oil spill of the concrete laser screed manchine
Patrol around the machine to see if there is oil spills and anomalies. Special attention should be paid to the high pressure hose connector, hydraulic cylinder, working valve, steering gear and oil seal. Such as leakage and other abnormal circumstances, should be repaired.
1.2 Check bolt and nut of the concrete laser screed manchine
Check the bolts and nuts, once found should be tightened immediately. Particular attention should be paid to the inspection of air cleaner, especially the rim bolt, the work head bolt.
1.3 Check circuit of the concrete laser screed manchine
Whether the wire is damaged, short circuit and terminal is loose.
1.4 Check engine oil level of the concrete laser screed manchine
Remove the engine oil dipstick in shutdown state, check the oil level. The engine is idling state, we should first determine whether the engine oil pressure gauge in the normal range, and then take out to see the oil dipstick. If you want to add engine oil, open the oil inlet and add. The type of oil used depends on the ambient temperature; refer to the schedule “fuel and lubricant types “. Check the oil level, the machine should be parked on the level surface. When adding oil, the oil level should not higher than the “H” mark.
1.5 Fuel filling of the concrete laser screed manchine
Start the power supply to check the fuel gauge, according to the oil level gauge, add fuel.
Notice: When filling fuel, do not spill fuel, so as not to fire.