Electrical and hydraulic connections of the laser screed
Block all disconnected electrical and hydraulic connections, keep the components in good condition, and take along them with the whole machine
Lifting laser leveling machine
Fix the suitable lifting device to the lifting part of the laser leveling machine.
1> You should put packing material where the lifting device may be in contact with the laser leveling machine, to prevent damage to the laser leveling machine paint.
2> Tighten the lifting device and stand away from the laser leveling machine.
3> To ensure smoothly lifting,please do trial lift,if it doesn’t fall to the groud,you should adjust the lifting device.
4> If the above operation is appropriate, thencontinue the laser leveling machine to the required position with a slow and clear action.
5> Land the machine to the desired position and remove the lifting device.
To ensure that the lifting device has the safety rope which could load suitable no-load weight laser leveling machine.
Packing and transportation of Laser leveling machine(picture 6-4)
There is a danger of tilting or falling of the laser leveling machine in the process of loading and unloading the laser leveling machine with a trailer.You should follow the below instructions：
You should drive on flat solid ground, avoid the place of road shoulder or cliff.
The sufficient springboard should be adequate in length, width and strength,you should also fix them firmly,to ensure them won’t be shift.