Warning:how Fueling to the concrete laser screed manchine
1.Stop the engine and pull the parking brake lever. To ensure that there is no open fire, do not smoke. When fuel is added, the driver should not stay in the car.
2.After the fuel is added, cover the lid tightly and lock it with the key. A loose lid can cause a fuel leak, or cause a fire in a bad situation.
3.Make sure the fuel tank lid is tight before starting the engine.
4.When checking the oil level, be sure not to use an open flame, such as a match or lighter.
4.1Hydraulic tank filler port
The hydraulic oil tank is positioned at the front side of the rear frame; the oil feeding port is a return oil filter mounting port.
The fuse is installed in the control which on the lower side of the rear frame.
If the lamp is burnt out, the lampshade is damaged or not clean, the lamp should be replaced or repaired immediately.
If you need to install the rear lighting, you can contact with our company, sent by my company to install.
The front side of the machine is provided with two headlights and a front combination lamp (a turning signal lamp and a width indicating lamp).