How to effectively extend the life of laser screed
1.Check the connection and tightening status of all the parts of the laser screed, see whether the connecting bolts are loose or broken, and get them fastened or replaced if necessary. Check whether there are leakages, timely remove all the leakage parts of various parts. Pay attention to the quantities of the engine oil, fuel, coolant and hydraulic oil of the engine, and add new oil to the level indicated by oil standard indicator according to the provisions of regulation. See whether there is appropriate amount of lubricating grease within the lubrication device.
2.Be careful not to work above the maximum load that the machine can withstand, and use the machine under the best possible condition. As a laser screed manager, when designating the operator, you should always give the laser screed random information and operating manual, etc. to the operators, so that they can normally grasp the mechanical performance and operating procedures, and you should not be arbitrarily retain the related materials to be in your own hands.
3.You should try best to ensure the even addition and subtraction of the mechanical load so that the machine could be under relatively gentle load changes, specifically to say, this is to press or relieve the throttle in a more even way so as to prevent dramatic ups and downof the movement of the engines and working devices.
4.After construction, the laser screed will have a lot of dust and mud, so first of all you need to clean the dust on the laser screed and wipe off all the dirt, grease wipe thin paper or cotton cloths.
5.If during the construction process of the laser screed, laser signal loss requires the machine to restart, the interval time needs to be more than ten seconds.