- Preparation before starting that using the concrete laser screed
1.1 Laser emitter placement
In a horizontal, less barrier position, the tripod is placed in a strong and stable position, then make the horizontal bubble on the top platform is in the black circle of the horizontal mirror.
The laser transmitter is fixed on the tripod platform, press the button to start. (NOTE: The transmitter will be automatically adjusted after a few seconds, and then the laser will turn off, and automatically turns on in 30 seconds.)
Adjust the tripod platform height (≥1.8m).
Set the zero point of the handheld receiver according to the elevation of the ground concrete requirements.
1.2 Digital receiver installation
The digital receiver is mounted to the upper end of the two lifting cylinders, adjusted to the appropriate height and then tightened
1.3 Work head preparation
Before construction, the work head can be painted with waste oil, and the concrete is not easy to stick to the work head, which is convenient for cleaning.