Starting method and procedure of the laser screed
1.Check the position of the rocker switch before starting.
2.1Turn the key to the start position. When the engine starts, release the key and it will automatically return to the on position. If the engine does not start, restart after 2 minutes, the dwell time of the key in the starting position must not exceed 15 seconds. When the fuel is used up, before start the engine, you should first add enough fuel, and then fill the fuel filter with fuel, exhaust the air in the fuel system, and then start the engine.
3.Inspection after engine start
The following checks shall be carried out after the engine is started:
3.1Pull the throttle switch to make the engine idling at medium speed for about 5 minutes.
3.2The engine should not exceed 20 minutes at idle speed or high speed. If need the engine idling, apply some load or increase the engine speed to the medium speed range.
3.3Check the exhaust color is normal, whether there is abnormal sound or vibration.
3.4Avoid sudden acceleration before warming up the engine.