Concrete Power Trowel For Sale

Concrete power trowel is also called walk-behind power trowel, concrete power float, concrete finishing machine. It’s structure is a spatula rotor driven by a gasoline engine, and the blades is installed on the bottom of the cross in the middle of the rotor. The inclination direction of the blade is same to the rotor’s rotation direction, and the V-belt is driven by the gasoline engine to rotate the balde rotor. When operating, set up the machine, hold the joystick, push the two forward together to move forward, and pull backward together to move backward. It is mainly used for the surface of cement concrete slurry, troweling, finishing. Same as ride on power trowel, it is suitable for the construction of wear-resistant floor and epoxy floor. The surface of the concrete treated by power trowel machine is flat, smooth, good in coagulation, and extremely strong. It can smooth over 100 square meters per hour on average, and the construction efficiency is more than 10 times that of manual finishing work.

Application Scope

Power trowel machine can be widely used for smoothing and troweling the concrete surface of high-standard factories, warehouses, parking lots, squares, airports and frame buildings. It is the tool of choice in concrete construction. Compared with ride on power trowel, it is small in size and easy to move. It can also be used flexibly in a small indoor area. It is usually used in the follow-up work of laser screed or roller screed to finish the concrete floor after leveling.

If you have quastions about our machine, please inquiry us. We will reply to your email in 24 hours.

Concrete Power Trowel Price and Products

Power Trowel Video

If you want to get more power trowel price and product information, please check our official website: Power Trowel For Sale

Features

Hiking has a variety of models of power trowel machines, the three most popular ones are selected below for comparison:

Transporting and Lifting

Remove the auxiliary lifting tube located on top of the main handle. Insert the tube into the socket located on the opposite side of the gearbox from the handle.

Make sure that the hole in the tube engages with the pin in the socket. With one person lifting from the main handle, and another lifting from the auxiliary lifting tube pick up the concrete power trowel to move onto a slab.

Use and lifting hook(if equipped) when lifting the power trowel machine. Make sure lifting device has enough capacity to hold machine (see identification plate on machine for weight).

Precautions For Using The Machine

Only trained personnel are permitted to start, operate, and shut down the machine.

They have received instruction on how to properly use the machine and are familiar with required safety devices.

Read, understand, and follow procedures in the Operator’s Manual before attempting to operate the machine.

The machine must not be accessed or operated by children and people impaired by alcohol or drugs.

Never operate this machine in application for which it is not intended.

Never operate the concrete power trowel with the belt guard missing. Exposed drive belt and pulleys create potentially dangerous hazards that can cause serious injuries.

Never allow anyone to operate this equipment without proper training. People operating this equipment must be familiar with the risks and hazards associated with it.

Do not operate the concrete power trowel with unapproved accessories or attachments.

Do not allow anyone to stank or lean on the unit during operation.

Do not run the machine indoors or in an enclosed area such as a deep trench unless adequate ventilation, through such items as exhaust fans or hoses, is provided. Engine exhaust contains carbon monoxide. This is a poison you cannot see or smell. Exposure to carbon monoxide can cause loss of consciousness.

Do not touch the engine or muffler while the engine is on or immediately after it has been turned off. These areas get hot and may cause burns.

Always Keep the safety stop switch system in adjustment and good operating condition at all times. Do not operate the trowel if it does not work properly. Out of control Trowels can cause serious personal injury and damage to fresh concrete surfaces. This system will automatically stop the unit if the operator loses control of it during operation.

Always make sure the safety stop switch is disengaged (lever in the down position) before starting the unit. Keep one hand firmly on the handle while starting and do not let go of the handle during operation.

Always wear protective clothing, safety glassed, hearing protection, safety-toed footwear to the job site while operating the concrete power trowel machine.

Always close fuel valve on engines equipped with one when machine is not being operated.

Always store the machine properly when it is not being used. The machine should be stored in a clean, dry, location out of the reach of children.